Product Description

 

1. Aplication:

This type is used for drawing and annealing copper wire and other alloy wire from 2.6-3mm to 0.4-2.0mm.

2-Parameters:

Machine type	JC-17DHT	JC-13DHT
Control system	PLC	PLC
Inverter control	Two inverters control	Two inverters control
Drawing dies No./max.	17	13
Inlet diameter	Ø 2.6- 3.0mm	Ø 2.6- 3.0mm
Out diameter	Ø0.4- 1.6mm	Ø0.65- 1.6mm
Drawing line speed /max	2000m/min	2000m/min
Slip ratio of m/c	20%	20%
Fix speed capstan slip ratio	15.5%	15.5%
Frame	Ironed cast	Ironed cast
Capstan	Carbon fibre plasma capstan
Main motor	55kw	55kw
Spooler motor	11kw	11kw
Fix speed capstan dia.	Ø 250mm	Ø 250mm
Online annealing	250T/B	250T
Wire range	0.4-2.0	0.4-1.6
Annealing voltage	0-60V	0-60V
Annealing current	2000A	1200-1500A
Spool bobbin size	Ø 500mm -630mm
Optional take-up machine	1-Drop coiler  2-Annealing part 3-Dual-spool take-up

3-Scope of supply(as below photo)

4-Overview

Intermediate Wire Drawing Machine with Online Annealing

5-Advantage:

1). Special seal system between the gear box and drawing section to prevent oil leakage and mixed.

2). Ironed cast and Wear-resistant capstan can keep long life.

3).For Second-section-annealing system, outside electrically neutral (no current flow to other unit)

4). Longer annealing section with tension ensure good and stable elongation.

5). Two types annealing were available to meet different size range and raw material.

6).Besides normal copper, also is a good choice for brass and some welding wire.

6-Delivery time: 45-60 working days

7-After-sell service:

Engineer will be dispatched at needed.

The buyer provides engineer’s roundtrip flight tickets, board and lodging, the security as well as each person of daily wage.

8-Gurantee: 12 months since shipping date(exclude easily wearing part)

Payment Terms︰ TT

Product Image