1-Aplication:
This type is used for drawing and annealing fine copper wire.
2-Parameters:
| Machine Type |
JC-DT24 |
JC-DT22 |
JC-DT17 |
| Drawing Wire No. |
One Wire |
| Inlet Dia.(mm) |
1.2 |
1.38 |
1.83-2.0 |
| Outlet Dia. (mm) |
0.15-0.35 |
0.15-0.40 |
0.30-0.80 |
| Max. Die No. |
24 |
22 |
17 |
| Max. Line Speed (m/min) |
1800 |
1800 |
1800 |
| Main Motor Power (kw) |
15 |
15 |
18.5-22 |
| Take-up Motor (kw) |
4 |
4 |
5.5 |
| Fix Speed Capstan Dia.)(mm) |
160 |
160 |
200 |
| Take-up bobbin size(mm) |
300/400or changed by requirement |
| On-line Continuous Annealing Device |
| Type |
160T |
200T |
| Annealing Wire No. |
One Wires |
| Annealing Wire Dia.(mm) |
0.15-0.35 |
0.30-0.80 |
| Annealing Voltage ( V ) |
0 ~ 60 |
0 ~ 60 |
| Annealing Current ( A ) |
0~250A |
0~600A |
3-Advantages:
1). Double inverter can keep the outlet wire precisely tension and the slip ratio of wire will be reduced to the minimum.
2). Third-section-annealing system, outside electrically neutral (no current flow to other unit)
3). Machine’s body and other key components and parts are produced by our own factory, quality is reliable.
4-Delivery time: 45-60 working days
5-After-sell service:
Engineer will be dispatched at needed.
The buyer provides engineer’s roundtrip flight tickets, board and lodging, the security as well as each person of daily wage.
6-Gurantee: 12 months since shipping date(exclude easily wearing part)
